-
The GPS suction mount works very well on this disk's smooth surface.
-
The GPS suction mount works very well on this disk's smooth surface.
-
I will say that the suction cup holds extremely well to the top surface, so if you have a hard, flat, smooth surface you need to stick this to, it might work ok.
-
The top surface may be easily scratched and so may not last long.
-
They fit on the suction cup but the sticky surface would not stay on the dash.
-
The directions told me to clean surface with an alcohol pad which i did and the thing didn't even stick
-
, I purchased this attachment disk to provide a smooth mounting surface on the dash where I wanted to mount the GPS
-
The top surface may be easily scratched and so may not last long.
-
line summary: Smooth mounting surface is excellent; 3M adhesive was excellent on our textured but flat dashboard
-
So the actual smooth surface of the disk is a bit smaller than the actual width of the disk.
-
I will say that the suction cup holds extremely well to the top surface, so if you have a hard, flat, smooth surface you need to stick this to, it might work ok.
-
while the disc IS 70mm, the ACTUAL USABLE surface is only 64mm.
-
this works perfect when you need that smooth surface for your suction cup mount
-
It needs a thicker foam adhesive to conform better to uneven surfaces
-
The tray is ribbed and I was concerned there wouldn't be enough surface for the glue to hold down and was particularly worried that the sun's heat would soften the glue
-
This product will work as the original was discontinued