the reviews I had read seemed to concur that you'd have to buy a $5 Android/iPhone app called 'Torque' to use this thing and read error codes and clear codes and what not, but I downloaded Car Scanner for Android and though it has some small, unobtrusive ads on the bottom of the screen, it works fine and does everything I need it to do, including clearing codes and displaying live data (fuel consumption, fuel economy, ATF temp, oil temp, MAF air intake temp, etc)

Turned out it was a spurious code and has not recurred in six months

- get the pairing prompt - enter the code - 1234, then they are both stuck at "pairing".

IT'S engine diagnostic codes and clears them.

Showed me codes and cleared them with ZERO issues!!

Once you get it to connect to your phone, you can pull all sorts of data from your car and clear error codes to turn of your check engine light to see if any problems persist.

So with that said, I was able to see my RPM, MPG , MPG average, radiator temp, cleared a few codes, etc

Was able to clear the code and so far engine light is still off

If you check the code, and suspect it to be a one-time event, use this tool and the smartphone app to clear the code

Install the OBDII scanner tool, pair it with the phone, open the app, check for fault codes, read them (yep, it's the ones from the faulty sensor), clear fault codes, confirm

Out of the box, I downloaded the free app and was able to read and clear my codes in a few minutes.

I've also used it to troubleshoot and clear DTC codes on friends vehicles

No one owned up to clearing the code afterward

(free reader at AutoZone worked fine and pulled/cleared codes without

I proceeded to buy the gas cap as recommended in the given link and it cleared out my code

Since the gas tank filler cap was a potential cause, and it was the original, I replaced it and cleared the check engine code

Connects and works easy enough but struggles to truly clear codes/fault log even after it says it is clear the codes are still present

Bought this to provide codes and clear codes while on a long road trip

Being able to read codes and erase them is fantastic.

Code cannot be cleared with any app

I must say very easy too use cleared codes on two vehicles in a few minutes very Happy!!

Trouble shot a code and repaired it the next day.

My purpose was to use to view (and subsequently diagnose) and clear fault codes (check engine light)

I had the switch replaced, but the repair shop forgot to clear the fault code.

I'm not a mechanic, but codes were easy to get and thru internet what they mean

There's a free app you download to use to connect via blue-tooth and it'll help check the codes causing the check engine light to turn on as well as clear the codes

Not bad at all, it's tells you more about your vehicle and finding what wrong and clearing codes are fast.

Product was great gave correct codes , ordered parts and changed them check engine light was removed

Needed to check any codes I had, easy to use

it did clear my codes it did tell me what the code was easy to download an easy to understand product worked really great

I've used CaRPM, which is a slick app, but charge an annual fee or an expensive lifetime fee if you want to clear codes

I did wish it was more customizable, in terms of overlay, and able to support more than one.-Code clearing: This device will not clear my error code, but also explains that my ECU is designed to clear codes automatically when its shut off and turned on

Found code, cleared code

This works awesome, diagnosed my first code, $15 easy fix, already money ahead!

It scans and can clear codes, shows real time info

But if you have to clear half a dozen codes it gets annoying real quick.

I cleared my codes before a trip to the shop so they would have a clean slate to test on during

Cleared the code , and worked with multiple apps from the Google store 👍👍

Like the ease of setup and use used to diagnose problem a clear codes.

This item worked very well very detailed code and problem with playstore app.

Had to pull over to clear codes

I used it on my nissan 370z to clear a code, and it killed my battery, and had to be replaced.

ford super duty very happy and saved me hundreds not having to buy a big expensive code reader defiantly recommend

Thanks to this, I was able to identify, fix and clear the error code on my car without having to go see a mechanic.

This and my cell phone app (free) worked perfectly to read and clear codes on my truck

The easy fix is to just acknowledge and then erase the codes.

I cleared one trouble code, and now I’m ready if it returns, to do any needed repair

Cleared code in a snap

This allowed me to read and clear the check engine code after I changed the bad part.

Awesome gadget...lets you erase codes too

so I used this and the app to clear the code that it was throwing out so that it didn't just constantly stay on.

so you get exactly what you pay for, but clearing codes is a whole other story

and I kept clearing my annoying EVAP code for months on a few day basis

I use it with Torque on my Nexus 6P to diagnose and clear engine codes.

Check engine light scan and clear codes

this is not for you if you are an amateur or just like pretty gauges then this is the reader for you it is able to clear simple codes but will not read airbag or tire codes

You may erase the codes after you are done fixing the issue

I have read and cleared codes on both the TDI and F250.

I'm keep getting a bunch of codes because of lean fuel or evap codes

Worked fine reading codes on my 2007 Dodge Ram 1500.

Got codes, cleared codes, etc...

I have not tried it with any other app, but the ease of use is the same you would get with a more expensive code reader.

However, it did not clear codes for my Volvo XC70, but they require a more specific scan tool, so no worries there.

and I used the Bafx to clear the code

It identified two different codes and cleared them after I fixed the problems

Cleared the codes and gave additional car info as well.

all of the basics, like coolant temperature, rpm's, check and erase error codes, speed, vacuum pressure, throttle position sensor, etc

I could read all check engine codes, clear codes, etc..

Used this product to diagnose the problem (had 2 error or fault codes) which told me I had 2 O2 sensors that needed to be replaced and also where they were located

Great for engine check light engine codes, web link to the trouble code and clearing codes to turn off light.

it does clear codes and is great for engine diagnostics

The codes suggested a problem with the Evaporative Emission system, including a possible faulty gas-tank cap

Fault code display & possible causes make repair ten times better than taking to dealer or wanna-be repair shop

has all the codes and the app works very well

Bought it in February 2016, and have only used it about 5 times since then to read and clear codes

I use this to clear/check codes on my 2012 Triumph America...works great.

I decided to erase the code and see if it returns prior to beginning a fix.

cleared my fault code easily

Turned the check engine light off, clears codes, reads codes

I use it in conjunction with torque pro and have had zero issues reading codes on

While this unit is not as capable as something such as a Tactrix OpenPort 2, it is great for clearing codes on the go or monitoring your car at a lower resolution (aka not as frequent in its metrics)

I have read and cleared codes.

Using in 2005 Toyota Corolla CE, I can read RPMs, clear any engine codes and do many things, this is awesome.

Not all codes are available from my van.

He suggested I get a device like this one, to clear the codes myself, so I don't have to go to him each time

Well I got the adaptor to clear codes for my 2008 bmw and it will let me connect to the car and read the codes only, also thought I had to buy the “pro” version to clear code but did not work

I don't know if it's accuracy is perfect, but it's helped me diagnose problems, read codes, and clear codes pretty efficiently

I was able to clear the codes, and force a regen on my 2016 ram ecodiesel.

I received an error code and used the scanner to clear the code to turn off the check engine lite that was caused by a misfire on startup.

I can see engine parameters in real time and clear codes quickly.

Once it's paired with a decent app (I use Torque), you can do a lot more than just read diagnostic codes as well!

Cleared error codes!

Cleared a few codes and shows great live information.

Well I got the adaptor to clear codes for my 2008 bmw and it will let me connect to the car and read the codes only, also thought I had to buy the “pro” version to clear code but did not work

It works great I've used it on alot of cars with no problems clears codes and is a great bargain for the price

i use it to read codes and clear codes

I fixed this fault and cleared the code within a few minutes

I've used it twice to read/clear codes, and each time it worked perfectly on my 2013 CMax Energi using the FordSys Free app

Blue Driver was able to read the code no problem

Figured out what codes were being shown, fixed the problems and cleared the codes

Worked perfectly, read codes, cleared codes, performed Diesel Buzz test on injectors, and connected to a couple of different bluetooth apps to do tests and read gauges.

It was kind of a pain to get the bluetooth to pair (about 15 minutes), but once it did it pulled the code and cleared it very quickly.

Great little product for the price you can't beat it help me with my codes and to clear some

This device allowed me to locate and fix a troublesome code on a 1995 S10 (V6, W engine).

Use it to clear codes on neighbor 2013 ford escape

The app can do all kinds of crazy stuff, including 1/4 mile times, 0-60, log error codes, clear error codes, all kinds of crazy stuff.

Does what I wanted it to do; reads and clears codes, gives engine vitals

Plugged it in, connected Android tablet, ran Torque Pro app, configured for bluetooth, started using to diagnose evap system and clear code after repair.

Great for engine check light engine codes, web link to the trouble code and clearing codes to turn off light.

Cleared the code and the light went out

I was able to troubleshoot multiple codes on the Cruze and clear once the part was repaired

I had an issue of P0172 (system rich) code plaguing me week after week.

With this device and purchase of an app, I was able to clear tbe fault code, then after a few days of driving, the emissions checks completed one at a time.

Very very useful tool! who needs an expensive code scanner that cant do what this can paired with the Torque app.

Cleaned up the connections in the engine with electronic cleaner, rested the codes with the scanner and so far so good.

If you are looking to use it to read/clear codes, and monitor ICP/IPR, and some other systems the ECM registers it is good for that, which is definitely useful

Worked fine repaired problems and cleared codes.

Cleared engine codes and view them as well

Now I can clear the code when it comes back on.

and it cleared my airbag light code (from changing my seat out).

I can read all the codes my f250 6.0 has available

No need to buy expensive code readers

Very easy set up, very easy code research available since the app does a web search

All I wanted to do was to read and clear a code on my F150

Clears some codes but not all

The setup, little playing around with torque pro, and clearing the codes

I followed the instructions to clear the codes and the check engine light went off.

Diagnosed several issues and was also able to clear a fault code that would have otherwise required a trip and money to the dealer.

Works as intended; reads and clears codes fine and retrieves stats from ECU.

My use case is clearing a code that I get often that I don't want to pay any more to a mechanic to try to fix.

I bought it to clear a code on my car and it not only cleared the code but told me what was wrong and all kind of

Used it on several vehicles, pairs easily with Torque and clears error codes on everything I've used it on

So far this has worked flawlessly, connected to my phone and through the app they mentioned and I was able to see the code and clear it.

The instructions were clear, the device easily showed me the codes, and easily cleared the codes

I have been clearing my codes for 5 years because of an emissions fix that is $3,000 at the dealer.

Worked without a problem have it hooked up to a 2005 Chrysler 300 cleared some codes and my cars running 100 times better

I bought another one to keep in my toolbox to read and clear codes on my cars

I was able to clearly see what the codes were, both the numbers and a description on my WK2 Jeep, and I was able to clear the codes after I attempted repair, I'm hoping my fix

Like the ease of setup and use used to diagnose problem a clear codes.

Just get a wired code reader if you just need code reading and clearing.

I could not get it to read or erase codes on my 2009 Ford escape hybrid

but it not only checks codes and can clear

It's also really helpful to be able to clear a code in cases like that

Android app, and I am able to read and clear codes quickly, as well as monitor more engine functions than I expect to ever need

Diagnoses codes, will do a Google search for some, you can do your own for your particular car, clears code if no longer active

If you need an inexpensive, reliable code reading tool this one works great

I did wish it was more customizable, in terms of overlay, and able to support more than one.-Code clearing: This device will not clear my error code, but also explains that my ECU is designed to clear codes automatically when its shut off and turned on

I opened and re-closed the cap, cleared the codes and restarted the car

If you want to read check engine light codes and clear codes then this is a good option

Not bad at all, it's tells you more about your vehicle and finding what wrong and clearing codes are fast.

Works great to clear codes and also to monitor and make graphs of live data

Works great to clear codes and also to monitor and make graphs of live data

I cleared the code, CEL is off, and everything is good.

If you make a repair you can clear the code .

It read the code accurately (as compared to what my mechanic told me)) and i was able to clear the code effectively

Got this next day, cleared my codes , drove my car 50 mile and smog checked clear before the light went back on

I was able to connect, see and clear my codes

I ordered this tool and plugged it in and saw that the code was calling out a completely different problem than what was quoted

Reads and clear codes as it should.

I had a mechanic fix it, so he naturally cleared the codes.

I cleared the codes and so far after a few days they have not turned back on and my car is running like normal.

Read the codes on my 2005 wrangler but would not clear them

It pulled and cleared code.

If you go to the dealer to check codes, they expect $100 or more to plug in, see and clear the code

Easy to use, read the codes for my 03 Subaru and helped me fix it myself

Works, easily connects over bluetooth, clears codes and shows you with a click to a weblink of what the code means.

Used it once to clear an error code from the gas cap.connected it to the Docooler Obd-

Will give you some codes, and clear them.

I can even put the unit in while driving, load the app, communicate via BlueTooth and clear codes, get realtime info, etc.

If you check the code, and suspect it to be a one-time event, use this tool and the smartphone app to clear the code

They you can clear the code.

Used in diagnostic, clearing codes and monitoring engine performance during travel

It clears codes and read's all sensors.

There are more expensive code readers, however I am not an auto mechanic so as for a layman like me it would be enough to know in general what is going wrong with a vehicle

I have only used this device to read and clear fault codes.

Clears codes

I changed it out and cleared the code and all is well.

the reviews I had read seemed to concur that you'd have to buy a $5 Android/iPhone app called 'Torque' to use this thing and read error codes and clear codes and what not, but I downloaded Car Scanner for Android and though it has some small, unobtrusive ads on the bottom of the screen, it works fine and does everything I need it to do, including clearing codes and displaying live data (fuel consumption, fuel economy, ATF temp, oil temp, MAF air intake temp, etc)

I hooked it up, read the code and cleared it

Love clearing codes and knowing what's going on with my engine.

I downloaded and use the free version of the recommended app, cleared the codes that needed to be cleared, and I am able to get a lot of real time information I never expected to be able to get.

I found codes on one truck, repaired it, then cleared the codes

I have even used it on other vehicles, read the codes and cleared them

You will need a 3 rd party app that you will need to pay for if you actually want to clear the codes

Great code reader.

Also used on 2015 Dodge Journey to clear code when my daughter forget to tighten gas cap.

Was able to clear all error codes from previous fixes I'd done and rescanned

Paired it through the Cummins Fault Code Advisor app instead of the bluetooth settings.

Being able to real time monitor, diagnose and clear codes is amazing

Already fixed and cleared 2 codes.

Cleared the code and hasn't come back yet

I also have a 2016 Nissan Titan XD diesel but it sets the check engine light for network error and will not clear the code, I have to use another product to clear the codes

Used this the other day to clear a code worked like a charm, has a lot of features just need to learn how to use a few more instructions would ,plus I now see the price has drop since I bought mine

I was able to clear the code for the "check engine" light on my car in order for it to pass inspection.

Was about clear old codes that need reset.

Had issue with it clearing codes, reason for 1 less star

But was unable to locate codes or clear codes

I did clear out the basic codes but will not let me clear out all of them.

I use this product to read OBDII trouble codes, find out the possible causes, and clear the codes

Anyway i definitely recommend this product for anyone with a 7.3 powerstroke or a vehicle they want to check and clear codes or see real time information

I can't recommend resetting codes though

Thankfully, it was able to clear the code, and after doing so, I removed the sensor and started the car again, and the code didn't show up again

Really handy code reader and

Because of the shutdown and fake science, none of the car parts stores are checking/clearing codes

I diagnosed the codes myself and then cleared them without needing anyone else

I bought this scan tool, downloaded a free app (there are many), and saw that the only significant transmission code was a faulty turbine speed sensor

Plugged this into my 1999 Toyota Camry and using Torque Lite (Android version), was able to see (cylinder miss fire) and clear the "check engine light" codes.

I use it to read and clear engine codes and it works great.

Reads codes and clears codes just fine!

I tried to clear a code on my check engine and it didn't work.

Pluged it into my car paired it with my Android phone cleared code no problems, works fantastic, I love it

Pluged it into my car paired it with my Android phone cleared code no problems, works fantastic, I love it

I discovered while the code was right it was definitely not a bad MAP sensor.

I'm not saying this device doesn't do what it state in the title, I'm just saying that it says it in a way that makes it seem like its a normal OBD2 scanner that can scan and clear all codes on all cars

Pluged it into my car paired it with my Android phone cleared code no problems, works fantastic, I love it

It works fine, but it requires a lot of extra taps with slight pauses to view and clear codes

Gives accurate code reading, which is the only thing I use it for.

I was chasing a misfire which required me to read and clear codes often

This thing will tell you what is wrong with proper error codes, I've used torque lite, but prefer Scanmaster app for android (you get more features)

I needed to get codes and clear them

Checks and clears codes, live data, nice interface

Read and clear codes

Plug and play unit that gives you understandable feedback and can clear codes.

Outside of that, it does work with some software and provides accurate codes.

Got tired of going to the auto parts store and borrowing theirs to check and erase the fault codes

Also used it to check and clear a code that was thrown due to overfilling gas tank

Cleared the code

So easy to use, you can clear codes on your car if you need it to pass inspection

Great at seeing what's wrong with your vehicles engine and clearing the code.

Great for reading codes, clearing codes, and even just keeping tabs on coolant temperature, intake volume, fuel economy, and some more fun statistics!

I didn't find anything serious wrong but cleared up all codes and the little issues i did have with ease

Decent.. for 20$ can't complain to much reads codes and clears them pretty easily

The codes explained my engine issue perfectly

With CataClean already in my fuel system I was able to clear the code, the dash light went

I also have a 2016 Nissan Titan XD diesel but it sets the check engine light for network error and will not clear the code, I have to use another product to clear the codes

It connected right away to my vehicle, and was able to read and clear engine codes

I couldn't get them to clear the code, but that may be just because it's a constant problem that needs to be fixed

Had issue with it clearing codes, reason for 1 less star

Works great and allows me to read and clear codes

Works great for those annoying codes that pop up

I have used it once to scan and clear the code for a check engine light as well

Wasn't expecting much for the price, I recd the reader, downloaded the free app, and it connected right up to my Android phone, works flawlessly, reads codes, clears codes just like a 100 dollar unit.

Great for diagnosing and clearing fault codes.

It quickly diagnosed the problem and I was able to remedy the problem and clear the code.

It works to clear codes, check pending faults, and to see what the various sensors are reading

I had my check engine reset twice which cleared the codes causing me to fail my inspection

reads and clears fault codes and gives great sensor readout, roughly 500ms update time so not bad

Have used it on several vehicles now to look at and clear codes.

I used it with Torque like they recommend, and was able to clear the Check Engine light and codes on my Integra.

Easily found and cleared code on 2002 subaru WRX

Works fast, you can erase codes

I could view temperatures, RPM's, oxygen sensor output, read and clear codes, OBD2 readiness monitors, etc.

Clears codes.

I was able to clear the error code which in turn shut off the check engine light.

Was worried, but works fine for clearing codes via Torque App on Android

Just make sure you have key on engine off if youre trying to clear the codes

Amazing product -- works as advertised -- works for KIA and NISSAN products as advertised -- Torque Light download was F R E Eand easy to use and for most this is all that one would need.