The buttons are almost unusable by how hard the material is

All three buttons are hard to use, and it doesn't even fit the phone well

Loose fit on the fingerprint side, hard buttons, don't buy and save your money

buttons covering the volume and power button is hard to press

Second, even with them sitting loosely some how the power and volume buttons are almost completely impossible to press

The buttons are so poorly designed and stiff, they work 10% of the time.

There is space on both side, fingerprint as well as button side.

The buttons are very hard to press and I don't think it will protect the device much at all

Also has hard buttons which don't flex like previously purchased same model.

The buttons are hard to push with it installed, power, volume control.

On the side with the volume and fingerprint scanner the box does not fit fully snug around the phone I can feel it move every time I go to use my fingerprint scanner is extremely annoying. also all the buttons on the box are extremely hard to push not really satisfied with this product returning immediately

The dislike on this case is that it feels flimsy and the buttons are so stiff that you pretty much have to push way hard to work the buttons

Issue is the buttons are very difficult to press and sometimes even activate the wrong function which can be very frustrating especially with the volume control.

The buttons are really hard to press and it's hard to put

What looks to be defective volume buttons

The off button will hit or miss when pressed

Works great with mods buttons easy

And worse of all, is the buttons hard to push, makes it to where I not even want to use it

Fits great, except you'll notice that the buttons are stiff for a little while

the buttons are hard to push but I do have full access to the finger print reader and my moto mods fit

The buttons are hard to press.

The buttons are hard too

Power button super hard to press

This is basically an elastomeric frame with cutouts (power & fingerprint reader) and buttons, the elastic buttons are pretty stiff, but got used to it after a few days

But the buttons are a chore to press with this case, particularly the power button.

This flaw makes it very hard to scan in fingerprint and work the buttons

The dislike on this case is that it feels flimsy and the buttons are so stiff that you pretty much have to push way hard to work the buttons

The buttons on the case are tough to press in but the fingerprint sensor is uncovered well enough

As others mentioned, it's loose near the fingerprint reader and the buttons are hard to press

The buttons on the side are a little stiff but should loosen up as it is used

The button over the power switch almost makes this case unusable, as it is extremely hard to engage the power button.

The volume and down button do feel clickable but the power button doesn't feel like you are pushing the button and feel hard and not clickable

The buttons are lined up right and they fill good

The power and volume buttons are also very responsive as well.

For the power button I used an exacto knive to cut a very small notch on each side and that loosened the tension so the button is much more responsive with very little pressure to activate

Also difficult to locate and work the volume buttons

Power button doesn't line up well but the other buttons are lined up well and the mods fit on the phone properly

Not terrible but the buttons are too hard to push and the edges of the case are a little sharp and tend to catch on the inside of my pocket.

Also the button are hard to push in on the power buttons.

The only really bad thing is the buttons are stupid stiff

The case is too stiff and need a better way of contacting those buttons.

All 3 buttons were impossibly hard to push under cold weather

Just a small improvement concerning the on / off button which I find not very sensitive

Two of three buttons are hard to press, although I loosened them up with the case off as best as I could

Also, the buttons were hard to press.

The buttons on the case seems very stiff

Upon receiving the phone case the buttons were very difficult to press

Power button almost impossible to press.

(I love to send lesson plan ideas to my coteachers) because the buttons are so difficult to press.

It is true that the buttons are hard to push, but I'm assuming with longer use they will loosen up

Overall I'm pretty happy with the case, but it could be better if the material covering the buttons was easier to push down

hard plastic, and button stiff to be pressing it.. not pleasant to use this case at all.

Just a small improvement concerning the on / off button which I find not very sensitive

Makes power and volume control buttons harder to push.

The case would be great if only the buttons could be pressed easier.