I ended up sitting there cleaning off all the epoxy before buying a different product to try again

Highly recommend this epoxy.

This bonds anything together and is the strongest EPOXY I have ever seen.

This is the best 2 part epoxy I have found for metal to metal.

Superb epoxy

The white hardener is normally about the slightly stiff consistency as the black epoxy.

JB Weld may be really good epoxy, but it's still just an epoxy

It is the only epoxy that lasts and will work on all kinds of material.

Whenever I need a strong epoxy, I will stick with J-B or Devcon.

Sure, it's just epoxy, but it's the best epoxy.

This is my favorite epoxy

J-B. They immediately send me fresh Epoxy

Great epoxy for the application, the price & the seller!

This epoxy is highly recommended.

An amazing product, far exceeds any other epoxy that I've used

Given its performance here though, and that it says it works on plastic, that it is the company's strongest epoxy, and that it didn't come with an expiration date, I can say that it's without a doubt the worst epoxy I've ever used.

QUICK-EPOXIESOrdinary (slow) epoxies (whether JB Weld or other epoxies) dry harder than quick epoxies and are generally the best choice.

I don't know if it really is scientifically, but from experience this makes it such a great epoxy to use compared to others

Allow it to cure for at least 24 hours before disturbing the epoxy

In models where regular epoxy wasn't strong enough

This is the strongest commonly available epoxy I use and I have used a considerable number of packets over the years.

I tried a fast set epoxy on one top hole and found it just as difficult since it was less viscous than the JB Weld product even though it set up quicker.

Very strong steel reinforced epoxy

good epoxy and holds well

Manipulate the maleable epoxy till it looks like it forms your strongest bond, otherwise you'll be like a batter who's afraid of the ball

Like most strong epoxy's, you have to combined the two for the product to work

Pros: This is the first epoxy I have used, however I do use glue all the time and in comparison I have to say JB Weld is amazingly strong once it dries

Always have a couple of packs of this great epoxy on hand for those emergencies.

Given its performance here though, and that it says it works on plastic, that it is the company's strongest epoxy, and that it didn't come with an expiration date, I can say that it's without a doubt the worst epoxy I've ever used.

this is really good epoxy.

I guess because no epoxy is truly that good and this is the best epoxy there is

It is a strong epoxy that works well

This extra-hard epoxy stays fluid-y for up to an hour, depending on temperature

This is my favorite epoxy

Holds up great, much better than the clear epoxy.

The MOST amazing epoxy of

Great epoxy.

The hardest, strongest epoxy I have

I had to "reform" the epoxy every 10 minutes for 30 minutes as it was running a bit flat and away from the crack.

Sizable amount of this tough Epoxy for heavy duty jobs.

WHEN TO USE OTHER EPOXIESFor materials other than metal, particularly for rigid plastics, other epoxies are usually better than JB Weld.

A different epoxy failed

Good epoxy

It's a fantastic epoxy a little dab of each, mix, apply, and a 24hr wait everything was fixed

I love this epoxy

If you need a tough epoxy that is nearly as strong as metal, JB Weld is the only way to go.

I used the epoxy to secure the USB and then epoxy the chassis to the body of the car.

Though I never would have expected any epoxy to be adequate for this job, the term "Cold Weld" gave me unrealistic hopes

Works fine as regular epoxy though

Sometimes referred to as a "2k epoxy" or "2s epoxy", this is one of the strongest epoxies that is readily available, affordable, and in practical sizes for home usage (there are many good makers of 2k's, but none are as easy to find for a cheap price in convenient sizes as JB Weld).It has an offensive

The hardest, strongest epoxy I have

One of my favorite epoxies, this works well and holds every time.

From reading some of the reviews, I should only use it in metal and not plastic, but the package says it works on "plastic" and is "our strongest epoxy".If the package said "for metal only" and "use before date" then I would have nothing to complain about

It works G-R-E-A-T !