Manually configuring the wireless network appears to disable the router's ability to connect to the external network

but I'm pretty network savvy and didn't have too much trouble.

the password for a new router will be 'admin'6) change settings as you wish to set up a secure network (you will have to add in a 'security protocol'

This is the first router that actually knocked down my entire network at one point, requiring me to disconnect it and power it off.

This product will NOT protect your internal network nor provide vpn, outbound traffic control, inbound traffic control or

But, on second thought, it occurred to me that most sites are moving to using https (secure http) protocol anyways, so even unprotected guest networking should be fairly acceptable, as https cannot be decrypted even over an unsecure wireles network

Oh boy, do I hate networking

If you have an E1200 (version 1), you should definitely disable WMM Support in the router, or you will suffer from very poor network speeds

I've had to reset it once when I lost my network after a storm, but the reset button is easily accessible, and it reconnected without problems.

Downside - it will not make a hard drive a network hard drive or a printer a network printer.

What this means to you:I'm mentioning all this because if you are using the Linksys firmware that comes with the E1200v2 router, then you might want to consider turning off WMM Support, if you are experiencing unreliable network problems.

Also has secure main network plus it sets you up with a guest network that appears to not be password

Excellent device to enhance my wireless network.

I do have trouble with the phone which frequently tries to use the wrong network.

couldn't get a steady network for anything

I was sick of the poor signal quality and slow network connectivity

* at home (did I mention I hate networking?)

(Network Attached Storage) works

Do your research if you need a good guest network

WARNING DON’T BUY AND WASTE YOUR