-
+ HP LS2 block Stroker and it always has great pressure.
-
Very good pressure
-
If you have active fuel management/cylinder deactivation on a Gen 4 LS (2005 and up), you'll need the Melling M365 or M10355HV as those supply the correct oil pressure and volume
-
Now i have steady oil pressure
-
Great oil pressure with this unit.
-
I've put a few thousand miles on it and continue to have great oil pressure (60 psi).
-
Perfect fit and great pressure
-
only problem I had is a bunch of random oil leaks because I now have the right pressure which is a good thing
-
The oe was still holding good pressure but would slowly loose a little around 30% oil life left on monitor (37psi idle 45 cruise speed)
-
The oe was still holding good pressure but would slowly loose a little around 30% oil life left on monitor (37psi idle 45 cruise speed)
-
Worked great for my 1997 corvette, used the black o ring and have great oil pressure
-
and it lost pressure again,
-
Has way better oil pressure now
-
after engine was warm it carried decent oil pressure but the new OIL PUMP boosted pressure about 20 pounds to 55 psi
-
If you don't get this right, the pump will pull air and you will have put in many, many hours replacing this only to have inconsistent/no pressure.