• Reviews around water (2.63 of 5)

    Mothers 07240 California Gold Clay Bar System

    • Wash the car with good quality car detergent and warm water, and dry it
    • Took out the hard water spots, this process takes time and patience
    • Had rusty water drip onto my car during the entire night from a pipe above in a garage
    • With some warm water and car soap (and a little muscle), these bars removed all the overspray
    • Hard water stains are tough to remove and they ruin the look of a car
    • The Clay Bar did a good job of removing hard water spots and most road tar spots.
    • So, my thinking is to wash car to get heavy stuff off, then clean soapy water with the clay bar over the surface to smooth it out, then wax with Mothers Syn Wax using the Powerball and finish off with instant detailer where needed
    • Used this for part of the restoration work on my EClass panoramic roof side panels.. they were faded from the sun and caked up with hard water spots... this clay bar kit really worked
    • The clay bars are okay, if you do not put enough water when you use it, it will leave a yellow mark which is hard to clean.
    • The spray itself is pretty much just milky looking water that has a curious smell of cinnamon to it and for the most part I would say that it is rather unnecessary as water will more then suffice
    • Water works just as well as a lubricant for the clay, but I used what they sent me, since it was all ready to go.
    • Please Read-I suggest using a bucket of water or a spray bottle with NORMAL SOAPY water for lubrication (think bubbly, but not gobs of foam)If your water is too soapy the clay starts to melt, but yes, slightly soapy water does work
    • i used this then a wax, and its smooth and beads water like glass
    • Just don't use dirty soapy water
    • My car has really bad water spots on the
    • This product and lots of elbow grease finally removed those stubborn water spots that the sprinklers left on my car.
    • Live in Long Island New York where there is hard water
    • Works like a charm, although i prefer to use warm water instead of the detailing spray
    • Just spray hot water on the windshield after you have washed it, rub the bar in circles, then up and
    • This simple piece of clay will solve your hard water stain and oxidation problems.
    • I used water instead of the included spray to continually slick the surface of the car and it worked just fine
    • I used water instead of the included spray to continually slick the surface of the car and it worked just fine
    • Water works better in my opinion to lube the bar.
    • When you run out of spray and still have clay left, just use soapy water water as a substitute.
    • Don't really need the detailing spray, soapy water works just fine
    • I had to get some hard-water stains out of my Black Coat... and since doing that I use the detailer alone now.
    • Great for getting rid of water spots and dirt
    • Clay is very hard when I put it in a bag and in warm water still fairly hard and breaks apart as I am rubbing it on the hood.
    • I found the lubricant to be an unnecessary cost, since you can put water in a spray bottle and it works just as well
    • My car feels like glass and it's taking off the horrible water stains!!
    • After claying the car, I rinse the clay with clean water then spray with its lubricant to moist it a little bit and put it in a bottle for
    • Close inspection reveals water spots and imperfections, but one would not guess that the paint is 11 years old!<center></center>
    • What it does not do: Remove scratches, swirls, anything that has etched or stained the surface such as acid rain, hard water, or bird droppings that sat too long
    • It cleaned the hard water stains from my sprinkler system but other than
    • I used the clay system to remove specs of tree sap from my new car's paint as well as from the windows
    • Works as it should.
    • I never thought the paint could come out as clean and smooth as it did after claying and waxing but result speak for themselves; the finish is glass smooth.
    • It works exactly as it says it works
    • I applied this product to my 2007 Mazda 3 (phantom blue mica) as well as
    • Works as it should be!
    • This product worked great to remove all the junk stuck to the car as well as give it a great polish