Very much recommend using one of those roller applicators when installing, as it will make for much faster and easier installation.

Yes, Dynamat Xtreme is a superior product, but this is 1/3 the cost and will give you the same results and easier installation time

Good installation instructions included

I used a hard roller to get a proper installation and would recommend using a roller to anyone who is looking for "complete" adhesion

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed