• Reviews around wire (1.97 of 5)

    Rexing Mini-USB Hardwire Kit for Rexing V1, V1P, V2, V1 3rd Generation, V1P 3rd Generation, V1P Pro Dash Cams

    • Very unhappy with this Rexing Hard Wire Kit Mini-USB Port.
    • I'll be looking for a different hard wire kit ASAP!
    • But right now it seems to be working great.4/13/2018 - Final Update:After vigorous testing my final recommendation is this wire is no good for me at least
    • The power input for this hard wire kit blocks the rear camera input of the VL1G.
    • Ground wire has a crimped ring lug And hot wire with a mini fuse.
    • A good wiring kit, plenty long!
    • One thing I would suggest to Rexing on the hard wire kit...attach the usb port in the opposite direction.
    • Like most, I'm a neat freak in trying to avoid dangling wires on my 12v sockets; With this hard-wire kit, I was able to quickly direct the wire behind the car molding using an old credit card in a matter of minutes
    • The quality of this product is good with exception of the undersized power wires that run from the 12v power source to the USB 5v converter box thats in the middle of the cord
    • The Hard wire kit itself was great, it just didn't match up to GMC Sierra where I could use it to hard wire the Rexing V1 3rd Gen into my truck..
    • If you plan on hard wiring your Rexing dashcam, this is a must.
    • All the wiring is generous in length.
    • This hard wire kit may work for some Rexing dashcams, but I purchased the new VL1G with rear view camera and built in GPS logger.
    • If anybody purchases the Rexing V1 I highly recommend to go with this hard wire kit.
    • In fact, my mobile electronics shop thanked me for showing up with the hard wire kit designed for my unit.
    • Warning ⚠️, the fuse on the hard wire kit is a mini type
    • I am able hard wire to the fuse box since my cigarette 12 volt doesnt turn off.
    • Rexing should update this product with minimum 18AWG and preferably 16AWG power wires
    • Pretty good hard wire
    • Used to hard wire my Rexing V1 into my 2013 Prius three
    • This is not a hard wire solution, meaning it won’t always be on when car turned off
    • this hard wire kit is a complete fail and will be returned.
    • It's also worth mentioning the unit I received did not match the picture and was hard-wired to one side of what appeared to be a 15A mini-ATO fuse (it was blue) covered in a rubber boot
    • I decided to NOT use the rear camera until I could figure out what to do, and I began running the hard wire kit cords through my roof
    • Works as expected, the thin wires are perfectly fine for a low power accessory like a dash cam, and are easily routed through the trim in the car
    • Works as expected, the thin wires are perfectly fine for a low power accessory like a dash cam, and are easily routed through the trim in the car
    • Otherwise the hard wire is a must have for continuous, uninterrupted power.
    • I had to cut the red wire w the fuse hard wired though
    • I had trouble figuring out where the wire to the camera came from as far as which side of the fuse terminals so that if one puts the fuse in 'wrong' the camera has no fused protection since it is possible to insert it so that the wiring would stay hot even during an overload event.
    • Used it to hard wire into the auto dimming mirror
    • This hard wire kit was relatively easy to install, but I personally find the kits that have the wires separated towards the bottom (black and red, separate ground and input wires) for more flexibility
    • Plugging this hot-wire contraption into an unused fuse slot would either route the power thru what appears to be a very oversized fuse or bypass it altogether
    • Easy to install and more than enough wire.
    • One thing I did do is cut off the 15 amp fuse that is hard wired and put on an add a fuse as I want this to be a separate circuit from anything else I'm running.
    • It's a hard wire kit.
    • Rexing hard wire kit work just as advertised
    • Got it hard wired to the fuse tap
    • I ordered this and had Best Buy hard wire my dashcam into my Tundra
    • Finally got my new dash cam system installed today using the hard wire kit
    • Pretty good hard wire
    • Generic hard Wire kits are less expensive than this one on Amazon!
    • Perfect fit for hard wiring my dashcam into my vehicle
    • Hard wire kit work great...
    • The hard wire kit made installing my dash cam very easy.
    • great camera and easy to use, hard wire kit for the vehicle is so easy to install.
    • This hard wire kit was just barely too short for that, but I was able to easily add some extra wire onto the end...
    • after hooking backup my original cigarette lighter adapter the camera powered on every time I plugged it in just like I would have expected the hard wire kit to do.fore
    • Also, I was sent one with a fuse hard-wired on to the end of the cable
    • Wiring to the fuse box seems a pain as the fuse box cover would need to be modified so as not to pinch the wires and to allow the cover to close
    • Simply locate hot and ground wires ten connect them together
    • More than enough wire for any car
    • This wire is a single solid wire from end to end, but towards the end where you attach it to your fuse box there is just a wee bit of wiggle room.
    • Nice substantial wires
    • Lead wires are pretty thin (16 gauge?), which made getting a ground connection a little more difficult i would have preferred
    • I have this hard wire kit in another car as well that has poor radio reception, now I'm interested in seeing if it's the cause there as well
    • I unplugged the wire and boom everything was crystal clear
    • hard wire kit works very well and has sufficient lenght of cord
    • The Rexing Hard Wire Kit Mini-USB Port IS NOT AS PICTURED!
    • Feels reliable and comes with good quality wires
    • Excellent kit with more than enough wire for 2009 toyota highlander and very easy to install so it cannot be seen.
    • The USB plug is a 90 degree plug that is backward; it points the wire down from the unit rather then up towards the headliner resulting in a loop of wire hanging down.
    • Had it professionally installed and they used the hard wire kit
    • The hard wire kit fits nicely into the passenger track and looks professionally installed.
    • I left this hard wire kit disconnected and used my Rexing camera with the cigarette plug instead and didn't have much problem.
    • Wanted an easy way to hard wire my Rexing dash cam, figured hay the Rexing hard wire kit should fit the bill
    • so there was no problem routing the wire through my full-size SUV to the fuse box.
    • Perfect for hard wiring my dashboard
    • Perfect to hard wire into your fuse panel.
    • The wire is quite long as well, easing the installation
    • Perfect wiring harness for the Rexing Dashcam
    • The hot and ground wires are encased together in a black wire jacket
    • Good quality wiring kit
    • The wire worked just
    • Lead wires are pretty thin (16 gauge?), which made getting a ground connection a little more difficult i would have preferred
    • It is ready to install, I díd take 10 minutes to install my dashcam