I was impressed with the solid metal construction, feels very sturdy and the adhesive is very strong as well

The solid metal construction is nice with no sharp edges.

Hold very well, and it's solid metal construction is 10/10

When the received the product I was immediately impressed by the solid construction.

It is aptly named a "truss", solid metal construction, overbuilt

Will find a way to mount after scraping the tape off (with new 3m or with silicon) as its a very nice looking unit

Really sturdy, nice looking, the adhesive works really well, sticks instantly to surfaces so me careful to set it straight because it's hard to move it after it sticks to something

The best for hanging headphones ...... quality construction ........ great looks ....... with 3m adhesive tape, this will not come off unless you purposely want it to .... after receiving one for my headset

this product is a smart looking headphone hanger that just looks great!.I was concerned with the 3M VBH tape not holding and was thinking about drilling Two holes to mount it

This would be a 5-star review as the actual hanger is incredibly nice, very solidly built and all around great looking

Being made of metal, this design is robust and elegant.

Place my headphones under my desk with a clean sleek design

I'm not sure if its real 3m tape or just a bad design

The Hooka is an all-aluminum product with some thoughtful design flourishes

It also has a very compact design that goes really well with any set up

Ridiculously well built, and sticks onto the bottom of my desk very securely

very well built, strong adhesive, easily carries my headphones

Got this shiped to me from amazon great prouduct well build works great under my desk I do recommend it for anyone that needs additional room under desk they hang their headset.

The product looks well built, the adhesive sticks pretty good

Sticky and won't come down, very well built all metal

The build quality is very solid as well as the texture of the product

Good quality hangar that can pretty much be hanged everywhere, it won't scratch your headphones at all

Great design, great quality, no complaints.

Super high quality, good 3m adhesive, works well for two headphones.

The quality and utility is awesome, but the attachment with the 3M adhesive just did not work as well as expected.

I got tired of my cat chewing on my cords and this works well for headphones as well as myOculus Rift.

Worked for about 3 months but then adhessive atoped working and it fell off

The Brainwavz Truss works very well as a headphone hanger if you're like me and have 2 sets of headphones

Got this shiped to me from amazon great prouduct well build works great under my desk I do recommend it for anyone that needs additional room under desk they hang their headset.

Really sturdy, nice looking, the adhesive works really well, sticks instantly to surfaces so me careful to set it straight because it's hard to move it after it sticks to something

Good metal construction, but adhesive weakened after 3 months of use and tore off some of the wall.

Overall really high quality, the metal feels solid and the adhesive works really well

Being metal makes this product feel anything but cheap and the sticky back is 3M and super strong, no worrying about it peeling off

I was impressed with the solid metal construction, feels very sturdy and the adhesive is very strong as well

The solid metal construction is nice with no sharp edges.

A surprisingly well made and well designed headphone hanger

I didn't even know things like this existed until I was shopping for a cheap headphone hanger to clean up the clutter that is my desk

I've had it for literally just under a month, and I have had to press the hanger against the wall on a number of occasions before it fell

Unfortunately the hanger ended up falling off only after 2 weeks of having it up.

The 3M tape is very adhesive and it great hanger for any size headphone.

The adhesive is very strong and has not budged since applying

It has a strong adhesive where it attaches to any surface

Would have given 5 stars but the adhesive gave way and it fell off the side of my wood desk cabinet the second or third day I had it

the adhesive separated from the device and now its useless. 5 months.

Two stars for a well designed, well made product - minus three for totally substandard 3M adhesive that doesn't hold

Solid mount and keeps headphones from bending too much in the middle.

Being metal makes this product feel anything but cheap and the sticky back is 3M and super strong, no worrying about it peeling off

They are attached to a suitable surface with a strong 3M adhesive

But I would very much hesitate buying another because no easy solution was offered to me to replace the defective mounting pad.

There is a strong 3M VHB Adhesive which is provided on the side for sticking this to walls and monitors

The thing is almost perfect just sucks if you need to move it cause of how well the adhesive on it works

It's not the hardest thing to do but there are definitely things you can do to make sure it sticks as best it can!

thing works just as it should, adhesive pad is strong enough to hold up two headsets, Looks awesome in the remote spot on my set desk.

Pretty much the easiest thing to install/use in the world.

I was only able to remove the original adhesive after spending a ridiculous amount of time heating the damn thing with a hairdryer, so unless your table is burning, you probably won't have to worry about your headphones accidentally falling off

Be sure to clean the surface you apply it to and to leave room to put your headset on

They are attached to a suitable surface with a strong 3M adhesive

I attached it to a clean, smooth surface, and within a month it has fallen off

Placed under my desk with no issues (unfinished smooth wood surface)

This hanger adheres to my desk via a very strong 3M adhesive surface on the back of it

I wonder where I could get a like 3M pad in case I want to move it to another desk.

thing works just as it should, adhesive pad is strong enough to hold up two headsets, Looks awesome in the remote spot on my set desk.

The self-adhesive pad is plenty strong (I've attached mine to the square metal legs on my desk)

The sticky pad is really strong, so no fear that the hook will fall off

The sticky pad is really strong, so no fear that the hook will fall off

Not sure I trust hanging my oculus headset from the other side.....

Holds two headsets amazingly well and sticks with no effort needed

Why have an expensive headset and just toss them down when you're done

I have two of these now to hang head phones and a vr headset and controllers on.

I was able to hang the headset immediately without waiting for adhesive to cure

The adhesive tape included is holding strong to an unfinished composite wood surface

I removed the VHB, stuck on some command strips, and mounted it to the bottom of my unfinished wood desk

It refused to stick to any surface I tried--finished wood, unfinished wood, and plastic

brainwavz customer service was not helpful I had orginally applied with 120 sec of good pressure 2 weeks ago to the wood surface after carefully the cleaning the wood with rubbing alcohol and letting that dry

Placed under my desk with no issues (unfinished smooth wood surface)

it works, but i ended up taking a lot of paint off of my wall after it got knocked off

For someone that criticizes a lot of products; the rating is very well deserved.

I hang a lot of $$$ worth of audio equipment from this hanger and it feels as sturdy as the day I mounted it

I feel like I've wasted a lot of time and money with this purchase and definitely regret

I feel like I've wasted a lot of time and money with this purchase and definitely regret

If you would rather have your headphones hang from a wall than put them on a stand, then the wall mounted hanger is the one

I've got 2 pairs of headphones hanging from under my desk now instead of sitting in top of it taking up space

it works great and if left be with headphones hanging form it, I don't think this hanger would ever fall off

I currently have two Sony MDR-7506 headphone hanging from it.

I have two pairs of headphones hanging on it, one heavier than the other, and the weight imbalance doesn’t phase it.

After about 6 months the stand started to peel the paint from off the wall and fell

Probably my mistake, honestly, (I mean who has painted walls these days, really

I think I'll also hang a plate on the wall with the hanger on the plate because when it fell off the wall, it took the paint and a part of the drywall with it