When the received the product I was immediately impressed by the solid construction.

I was impressed with the solid metal construction, feels very sturdy and the adhesive is very strong as well

The solid metal construction is nice with no sharp edges.

Hold very well, and it's solid metal construction is 10/10

It is aptly named a "truss", solid metal construction, overbuilt

this product is a smart looking headphone hanger that just looks great!.I was concerned with the 3M VBH tape not holding and was thinking about drilling Two holes to mount it

The best for hanging headphones ...... quality construction ........ great looks ....... with 3m adhesive tape, this will not come off unless you purposely want it to .... after receiving one for my headset

Really sturdy, nice looking, the adhesive works really well, sticks instantly to surfaces so me careful to set it straight because it's hard to move it after it sticks to something

Will find a way to mount after scraping the tape off (with new 3m or with silicon) as its a very nice looking unit

This would be a 5-star review as the actual hanger is incredibly nice, very solidly built and all around great looking

Place my headphones under my desk with a clean sleek design

The Hooka is an all-aluminum product with some thoughtful design flourishes

It also has a very compact design that goes really well with any set up

Being made of metal, this design is robust and elegant.

Upshot: I am keeping this unit because of its superior design and build quality

Sticky and won't come down, very well built all metal

The product looks well built, the adhesive sticks pretty good

Got this shiped to me from amazon great prouduct well build works great under my desk I do recommend it for anyone that needs additional room under desk they hang their headset.

Got this shiped to me from amazon great prouduct well build works great under my desk I do recommend it for anyone that needs additional room under desk they hang their headset.

Ridiculously well built, and sticks onto the bottom of my desk very securely

Good quality hangar that can pretty much be hanged everywhere, it won't scratch your headphones at all

Great design, great quality, no complaints.

The build quality is very solid as well as the texture of the product

The quality and utility is awesome, but the attachment with the 3M adhesive just did not work as well as expected.

Overall really high quality, the metal feels solid and the adhesive works really well

The Brainwavz Truss works very well as a headphone hanger if you're like me and have 2 sets of headphones

Really sturdy, nice looking, the adhesive works really well, sticks instantly to surfaces so me careful to set it straight because it's hard to move it after it sticks to something

Got this shiped to me from amazon great prouduct well build works great under my desk I do recommend it for anyone that needs additional room under desk they hang their headset.

I got tired of my cat chewing on my cords and this works well for headphones as well as myOculus Rift.

Worked for about 3 months but then adhessive atoped working and it fell off

Hold very well, and it's solid metal construction is 10/10

Overall really high quality, the metal feels solid and the adhesive works really well

Being metal makes this product feel anything but cheap and the sticky back is 3M and super strong, no worrying about it peeling off

I was impressed with the solid metal construction, feels very sturdy and the adhesive is very strong as well

Good metal construction, but adhesive weakened after 3 months of use and tore off some of the wall.

Overall a great headphone hanger, I just wish it had screw holes for a more secure hook, although the adhesive is fairly strong.

The Hooka is also like the Hengja and Truss that I reviewed earlier is complete metal build with powder coated black matt finish and white brainwavz logos, this time also they have provided a stopper in the front to ensure there is no accidental slip of headphones and the hangers is a bit lengthy and can accommodate 2 headphones, There is a strong 3M VHB Adhesive which is provided on the side for sticking this to any sides of walls, table, shelf etc

but you know you're getting a good quality headphone hanger

A surprisingly well made and well designed headphone hanger

The 3M tape is very adhesive and it great hanger for any size headphone.

The adhesive is very strong, and inconspicuously fits under any desk surface

Would have given 5 stars but the adhesive gave way and it fell off the side of my wood desk cabinet the second or third day I had it

just had some weak adhesive I guess because it did not last long

The adhesive is very strong and I have no concerns at all that it will drop

The adhesive is very strong and has not budged since applying

The Hooka is also like the Hengja and Truss that I reviewed earlier is complete metal build with powder coated black matt finish and white brainwavz logos, this time also they have provided a stopper in the front to ensure there is no accidental slip of headphones and the hangers is a bit lengthy and can accommodate 2 headphones, There is a strong 3M VHB Adhesive which is provided on the side for sticking this to any sides of walls, table, shelf etc

And I am now stuck with two useless mounts, wishing I had been forewarned this of the adhesive issue.

Not the cheapest of these options, but very solid construction, with adequate room for two sets of headphones, and very effective mounting adhesive.

They are attached to a suitable surface with a strong 3M adhesive

There is a strong 3M VHB Adhesive which is provided on the side for sticking this to walls and monitors

The thing is almost perfect just sucks if you need to move it cause of how well the adhesive on it works

Pretty much the easiest thing to install/use in the world.

It's not the hardest thing to do but there are definitely things you can do to make sure it sticks as best it can!

I need it to hold one, but this thing is SOLID - and I like it.

The only at all negative thing I have to say is that on both items, the backing on the tape had partially come off during shipping

Also, make sure that the surface is mostly smooth and flat

If the surface is not perfectly smooth, the load of two headphones will definitely drag it to fall in less than 30 minutes.

This hanger adheres to my desk via a very strong 3M adhesive surface on the back of it

They are attached to a suitable surface with a strong 3M adhesive

Be sure to clean the surface you apply it to and to leave room to put your headset on

The sticky pad is really strong, so no fear that the hook will fall off

Since it uses the sticky pad, you do not have to drill and holes or use any extra tools to mount it, I like that

Sticky pad is so strong you cannot reposition it after application, so make sure it's where you want it to be.

Ripping off the holder rendered the sticky pad useless so the only other option was for me to drill two holes in the base myself for re-mounting.

It's sturdy, and the 3M sticky pad isn't coming off for anything

I have two of these now to hang head phones and a vr headset and controllers on.

Holds two headsets amazingly well and sticks with no effort needed

So this leaves me with a hook and not way to hang it and a broken headset

I was able to hang the headset immediately without waiting for adhesive to cure

Not sure I trust hanging my oculus headset from the other side.....

It refused to stick to any surface I tried--finished wood, unfinished wood, and plastic

Placed under my desk with no issues (unfinished smooth wood surface)

brainwavz customer service was not helpful I had orginally applied with 120 sec of good pressure 2 weeks ago to the wood surface after carefully the cleaning the wood with rubbing alcohol and letting that dry

Placed under my desk with no issues (unfinished smooth wood surface)

The adhesive tape included is holding strong to an unfinished composite wood surface

I feel like I've wasted a lot of time and money with this purchase and definitely regret

I hang a lot of $$$ worth of audio equipment from this hanger and it feels as sturdy as the day I mounted it

it works, but i ended up taking a lot of paint off of my wall after it got knocked off

For someone that criticizes a lot of products; the rating is very well deserved.

I feel like I've wasted a lot of time and money with this purchase and definitely regret

I currently have two Sony MDR-7506 headphone hanging from it.

I've got 2 pairs of headphones hanging from under my desk now instead of sitting in top of it taking up space

If you would rather have your headphones hang from a wall than put them on a stand, then the wall mounted hanger is the one

it works great and if left be with headphones hanging form it, I don't think this hanger would ever fall off

I have two pairs of headphones hanging on it, one heavier than the other, and the weight imbalance doesn’t phase it.

Probably my mistake, honestly, (I mean who has painted walls these days, really

I think I'll also hang a plate on the wall with the hanger on the plate because when it fell off the wall, it took the paint and a part of the drywall with it

After about 6 months the stand started to peel the paint from off the wall and fell