This is a great value and works nicely with my blue yeti

A decent arm that’s pretty sturdy but not advertised properly as it doesn’t attach to the blue yeti microphone I have, the adapter it comes with is too big and the main screw is also too big, decent value but a waste for me unfortunately

This microphone arm is a very solid value for your money

It is a BEAUTIFUL microphone arm at an incredible value

This is a great value and works nicely with my blue yeti

Cleared up space for my desk to make streaming so much easier!!

I eventually don't use the shock mount but this works just fine, the arm extension seems to absorb a bit of vibration in my opinion/test, or at least I can move it a bit further away from my desk/table surface, clamping the suspension arm to my desk shelf, clearing some space

It has a good space to keep wires from getting pinched when adjusting.

how’d I do setting it up, but it was super easy, and there’s a little card that shows step by step on what to do, as well as, it came with all the added BONUSES, which definitely help me even more

I needed a means of clearing up my desk space and this was the perfect addition

Does not support the weight of a blue yeti + shock mount well as advertised

Even without a smaller mic, the right shock mount can circumvent any potential size issues

Important to know that the circular vibration reducing ring support ("shock mount") does not fit the Blue Yeti

Now I have to order and purchase a compatible mic shock mount just for a Blue Yeti!

No matter what I tried neither the shock mount nor the regular mount worked on my mic

Overall a good setup, quality on the stand is good but accessories not so much

Easy setup and install

It's also got a super easy setup

I needed a better microphone setup

Otherwise, this is a great purchase and it is solid on my desk, I would say that I recommend this desk mic to a friend or family.

Decided to try and find an affordable, but also high rated mic stand for my Blue Yeti Microphone, and this one is definitely a great purchase I’ve made recently

I a regretted this purchase

But overall a great purchase knowing I wasn't going to use their mount anyway.

Overall, this is a great purchase if what you need is a good, sturdy arm, but I wouldn’t rely on the quality of the additional accessories.

I love this danged thing

I love this thing, it has made it so much easier to record and keep a clear desk.

This thing works and works well.

This thing works and works well.

The actual microphone only weighs about 1 lb, so this stand is somewhat over built, which is certainly not a bad thing

Holds the mic securely and conveniently out of the way, but in good speaking range.

Made in China product would only recommend if you don't need the shock mount and the range of motion

The range of motion is terrible

It's cheap flimsy the range of motion to put it into a decent position is also garbage like the microphone stand itself!

Very cheap parts, kind of small, and a basic range of motion

Even if some parts of this product literally doesn't work, the actual stand itself is well-constructed.

This is an inexpensive mic stand and it worked well, but only for a short time.

This is an inexpensive mic stand and it worked well, but only for a short time.

The mic stand is strong enough to hold my Yeti Blue microphone where ever I place it.

This stand works extremely well and is great for the blue yeti mic!

if i accidentally tap the desk, overall I’d probably still buy it because it wasn’t a bad price and came with everything needed.

It's easy to set up, but the ancor points reflect the cheap price

Great price, pop filter works well, able to be moved conveniently or holds position sturdily base on tightness, but the included shock mount DOES NOT hold a Blue Yeti X mic

The price alone was a little scary, seeing as competition was much higher, but I grabbed one anyway

I really wish the shock mount would have worked out for me but the price was too good to pass up.

The arm Itself is great and seems like it’s of great quality.. but the table clamp is terrible quality.. it literally broke in half out of nowhere and sent my mic to the floor

I would suggest getting a better quality one if you have the funds

All in all spend a little bit more and get a better quality mic

It is semi-poor quality and has a hard time holding itself up

Easy to setup and easy to use, very good quality and works very well.

The arm itself is super sturdy, but the only con is the clamp at the

It's about 3/4" too small for the Blue Yeti, which has a diameter of approximately 2.75".Other than that disappointing discovery, while the arm seems very frail, it actually holds the weight of the Yeti pretty well.

Great arm, works well, my husband uses it Attached to his office chair

Where most extended boom arms would collapse under the weight of a studio mic, amazingly, this arm holds the mic AND the pop filter with no sag or failure

Overall, this is a great purchase if what you need is a good, sturdy arm, but I wouldn’t rely on the quality of the additional accessories.

Now I have to order and purchase a compatible mic shock mount just for a Blue Yeti!

This is absolutely the best experience I've had with a mic stand in this price range and its perfect for you if you have a blue yeti, snowball, or other smaller mics

All and all this stand will NOT work as is with your Yeti Mic

THEN put it on the screw that's on the arm, twist mic until blue yeti is firmly on

This product evidently supports the Blue Yeti Ball mic, but not the regular Blue Yeti.

Even with the adjustable O-rings, it still won't fit

Your browser does not support HTML5 video.

The table has to have a flat surface underneath where the clamp is gonna secure

It looks like the clamp is made with a mold, and it has a defect causing the metal to crack

The clamp is shallow so if your table has a larger beveled edge, it won’t work

The clamp is weak and cannot hold onto anything for proper support

how’d I do setting it up, but it was super easy, and there’s a little card that shows step by step on what to do, as well as, it came with all the added BONUSES, which definitely help me even more

This boom arm that i put on my blue yeti works fine just does not absorb the shock so well and is not so long

The shock mount does not fit my mic nor does the blowout preventer (even with it mounted all the way at the top of the

Cost effective but the shock mount does not fit the blue yeti microphone that it advertises in the title.

Very great for the blue yeti and yes it does work for this microphone you do have to skip a step or two for it to work with the blue yeti but over all it’s a great stand if you need help you can add my

yes it does come with the screw for the yeti but the shock mount does not fit

Because this is dishonest advertising, and clearly they do that to distinguish it from other ones that seem to be otherwise exactly the same but are cheaper or come with extra pieces that this doesn’t, I have to knock it a couple stars

False advertising, and very disappointing.

how’d I do setting it up, but it was super easy, and there’s a little card that shows step by step on what to do, as well as, it came with all the added BONUSES, which definitely help me even more

Yes, the microphone ARM works with the Yeti, and it includes an adapter to make it work... but the advertised shock mount does NOT fit the Blue Yeti.

Does not support the weight of a blue yeti + shock mount well as advertised