PAC SNI-1/3.5 3.5-mm Ground Loop Noise Isolator Works with i... - 2024 report by Whydis
PAC SNI-1/3.5 3.5-mm Ground Loop Noise Isolator Works with iPod/Zune/iRiver and Others
Line out converter for factory radios with 2 to 50-watts per channel. Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.Product Features 50 watts maximum input per channel Linear 20 to ...
The device works as intended, it helped get rid of feedback in my headphones (Sennheiser 569)
Other wise I can't hear it during normal use, I highly recommend this product of you need an in line filter for your audio input while you are trying to charge the device.
Great product and works as intended with my Bluetooth device.
works as advertised - easy to connect to device - does what is was purchased for.
Works completely as advertised and I recommend it without reservation
Works exactly as advertised, and I notice no degradation in audio quality or volume level
Works just as advertised, and even gives a slight boost to the signal.
The device removed the hum as advertised, but it also reduced the volume to only come through one side of my headphones, as if it isolated the noise to mono instead of stereo.
Shipped and received very quickly and worked like a charm - annoying high pítched whining noise experienced with Bluetooth adaptor (Kinivo BTC450) was completely abated with this device!
worked as expected for a while, but now the left speaker line stopped working. if I shake the device it'll work again for a minute, but seems to be a loose connection somehow.
This took the noise out just as expected
Works exactly as expected - the terrible hissing noise linked to my engine revs gone 100%Very happy with the sound quality now!!!
It did work as expected, eliminating completely the noise observed after the instalation of the Belkin CarAudio Aux with bluetooth.
Does a fantastic job of knocking down ground buzz and RF interference on mini connectors
Great Noise Isolator - does the great job as it should - no static in my
This devise did a great job eliminating the minor ground loop noise I had on the aux port in my car.
Works well - Did a good job of eliminating background static noise
It does a great job at isolating the ground loop buzz, but if it was in a less accessible location I'd hate this thing (because I like to hear both speakers).
This item is working great in my Scion tC. I have it connected to a bluetooth
The limit that this item has that if you have multiple aux female ports with splitters, like I do, only the one that is connected will work and not the others
This item eliminated some interference from the other electrical devices I have in place, and restored crisp sound quality.
This item eliminated the ground loop noise from my mp3 player when it was plugged into the car cigar lighter for power.
Item broke after almost 1 year, however it's cheap and I bought another
I can pound away for hours now to noise free audio in my truck and women find me to be irresistibly attractive, especially when I put on my Dan Hicks and his Hot Licks 8 track
I returned this product because while it does stop the noise from a ground loop it distorts the audio far too much.
and I now have crisp clear audio without any electronic noise interference!
I'll blame the Bluetooth adapter for the bad audio THIS time, but I really wished this device had done SOMETHING.
All I got was 100% clear audio from whatever was plugged in
For anyone that gets the annoying buzzing when you're listening to music in your car through the aux in and have your phone charging, this solves that issue.
Simple to install and it got rid of the annoying ground loop buzz!
This has worked very well to reduce the audible buzz that would accompany the playback of an audio book (or other audio presumably) which is a welcome relief.
Used to have annoying buzzing while listening to music via my phone in my car, while it was charging
Turned up the TV, the mixer channel and my headphone volume to max (with nothing playing) - totally silent, when before the buzz would have been audible with the headphones laying on the desk
Already put in 1 recommended ground loop isolator some years back and the problem went away
Other wise I can't hear it during normal use, I highly recommend this product of you need an in line filter for your audio input while you are trying to charge the device.
Does the job - it keeps ground loop noise out of your stereo
If you are looking for a ground loop noise isolator, this product works perfectly
Overall, If I ever hear of anyone else having the static issue, I will recommend this ground for sure
You are reading snippets from reviews of PAC SNI-1/3.5 3.5-mm Ground Loop Noise Isolator Works with iPod/Zune/iRiver and Others
More about PAC SNI-1/3.5 3.5-mm Ground Loop Noise Isolator Works with iPod/Zune/iRiver and Others
Line out converter for factory radios with 2 to 50-watts per channel
Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.Product Features 50 watts maximum input per channel Linear 20 to 20,000Hz output based on input signal Transformer isolated for optimal sound and performance Maintains correct phasing Works with most factory installed radios
Save on
Pinterest
