I bought this same Mr Coffee burr mill approximately 2 or 3 years ago and all setting work great from a fine powder to a coarse grind

Some of the coffee is ground into a fine powder and it turns into concrete inside the plastic receptacle.

The grind was never consistent and always created a very fine powder that built up in the cup.

I would regularly get a buildup of fine coffee powder (think espresso levels of fine) alongside the larger grind for Drip Coffee or French Press

The grinds were a bit inconsistent, with plenty of fine powder

This is the 2nd one I have owned and had to find it on Amazon to get it as our stores were out of them! great buy!

I paid $39 for the grinder, which was a fair price for this burr grinder

Still, for the price it's not too bad.

It works and does what it says it does at a great price

Thank you for offering such a quality product for a reasonable price.

The price was right and I trusted the Mr. Coffee brand, so for $

After a couple months of having this grinder and using it only a handful of times, it has completely stopped working and will not grind any coffee beans

This works great as coffee grinder, just a little noisy

It’s pretty loud, but it’s coffee grinder… works great, I would definitely recommend this grinder.

The adjustment to ground the coffee course or fine works great!

This works great as coffee grinder, just a little noisy

It does a good job of grinding the coffee beans, but way too loud.

Its very easy to use, seems to do a good job for my french press and drip coffee maker

The grinder does a good job and as a bonus smells good while you are using it!

This machine is noisy but does a great job grinding so far.

Does a lousy job of grinding, basket unit pops out all the time so you have no idea of when you’ve ground enough coffee despite daily cleaning

but I get somewhat inconsistent size at finer settings

This is a a good size for grinding espresso beans for daily use.

The reservoir is a great size and holds a lot of beans as well.

Has adjustment for time and for coarse/fine settings and perfect size reservoir for beans on top.

The size setting doesn't work

Overall a good enough product and value that I just got a new one when the first one broke.

a little messy but best value for my money

I typically shake the grinder as it is grinding to loosen up the beans, so it doesn't miss too much

You can also set it to grind only as much as you need, by number of cups

Great value and worked well until it died about 16 months after purchased

This product was great but only lasted for 4 months then just stopped working

Due to amazons return policy I'm not able to return this defective product

Bad customer service, lack of honor and commitment, poor product quality.

I'm an architect and know good design - this is not a well-designed product

Not from Mr Coffee, why would they support the poorly designed product they sold me

It is unfortunate the switch failed, because it's still a solid burr grinder

Long story short, coffee beans all over the floor, glued it to finish the bag, threw it out and bought a nice burr grinder

Inexpensive for a burr mill, a little noisy, scares the cats, and the combination scoop/brush is almost worthless; but, all in all, a decent coffee mill, certainly better than blade mills priced more inexpensively.

18 Cup Automatic Burr Grinder and my coffee grinds have never turned out better

Great burr grinder!!Economicly priced, easy to use,multiple fairly accurate grinder settings.

Easily adjustable grind settings give accurate grind consistency

It’s easy to use and has enough settings that I sure everyone will find the right one for their coffee

It gets clogged too often, maybe i’m grinding on wrong settings or

The hopper holds a pound and the beans stay fresh until I push the button to grind!I also love the fact that I have so many grind settings!

After one grinding on the highest grade one time, all the settings between 2 and 18 are the same, just rough grind coffee, not espresso grade.

AFTER 1 YEAR OF USE, cheap hopper broke off of unit after one year of use

The clear plastic bean hopper was broken from the black plastic hopper piece that screws into the grinder base

During the use and right at the beginning the hopper actually BROKE off!

But what brings the rating down is that the hopper itself, that which contains your coffee beans, is not stable.

It functioned well, until the clear plastic hopper separated from the base that screws into the grinder.

Recently I was available to watch her grind some coffee

Nothing like the smell of fresh ground coffee in the morning!

but I do like the grinder and was of being able to push a button and have fresh ground coffee

-you can grind coffee very very fast when on the coarse setting.

This unit does grind your coffee the way you want it to

This one not only holds enough beans to make coffee every day for a week it grinds so much finer and shuts itself off after each grind

Prefer going to local coffee roaster who will grind beans to perfection.

We grind beans to the consistency we needed and it worked just fine

It does grind coffee beans but the ridiculously short cord doesn't reach a plug

This one not only holds enough beans to make coffee every day for a week it grinds so much finer and shuts itself off after each grind

This thing will grind up some coffee beans like you ain't never seen before the girlfriend loves it.

Fortunately this can be solved by just holding the thing down while you grind

The absolute best thing is that it stores the whole regular-size bag of coffee beans in the container, so you never have to deal with the mess of half-full bags of coffee beans

It's not like were throwing this thing around, we put coffee in it, I put coffee into coffee potVery

It's really loud, though, and not the easiest thing to clean

My counter looks like a coffee bomb went off every time I try to use it.

My counter looks like a coffee bomb went off every time I try to use it.

Beans do jam a few times but the hopper works pretty good

had this POS for a handful of months it was working ok for a minute but wont grind anything now, just instantly gets clogged, heats up[ then trips internally do not waste your time or money with this disappointment

It makes a powdery mess Every time I open the coffee container.

we would grind about 30 cups of coffee grounds to store.

Eventually, it got so bad that, after thoroughly cleaning the motor chamber, then brewing 8 cups of coffee over four days of use, I again opened the bottom and vacuumed the motor chamber out.

You could set it to 2 cups and it could grind all 12 cups.

Once you do pick the coarse grind you want and how many cups

At least I had a good cup of coffee before writing this

It is a bit louder than my nold model, but it works fine.

Sometimes the beans wouldn't grind without pushing them down into the grinding chamber a little bit first.

However, while the grinding from coarse to fine is quite good and has no issues or stoppages, the unit does require quite a bit of effort to clean out the ground coffee.

Pros:• Does the job• Fairly easy to clean• Grinds evenlyCons:• A bit loud!• Even at the coarse French-press setting, generates fine coffee dust that you don't want for this type of coffee• Hopper is not air-tightNote: Don't open the ground-coffee holder/container till you get to the sink

Pros:• Does the job• Fairly easy to clean• Grinds evenlyCons:• A bit loud!• Even at the coarse French-press setting, generates fine coffee dust that you don't want for this type of coffee• Hopper is not air-tightNote: Don't open the ground-coffee holder/container till you get to the sink

right where the cord storage is and when I shook the mill, coffee grounds came spilling out

This mill provides a good consistent grind, as long as you continually shake the machine while grinding to keep beans flowing

Just a couple of days ago, when I moved the mill to clean it, I noticed about a tablespoon of coffee grounds right under where the mill had been sitting

Inexpensive for a burr mill, a little noisy, scares the cats, and the combination scoop/brush is almost worthless; but, all in all, a decent coffee mill, certainly better than blade mills priced more inexpensively.

We love this burr mill

The loud noise level and coffee grounds and ground coffee getting into motor housing, and falling out of the base onto the countertop is enough to get on my last nerve.

Works quickly and while it is a grinder do there will be noise it was less than the noise from the blade grinder

The loud high pitch noise which scared the cat, and woke the

Arrived fast, makes more noise than I anticipated, works well

I threw it away and bought a different model that turns slower and has a reasonable noise level.

When they modify these awkward design deficiencies they will have a good machine.-Keith

I'm an architect and know good design - this is not a well-designed product

I specialize in green, sustainable design; this is the kind of product that fills our landfills because replacement parts are not available - the grinder still works

No product should break like this unless it is a poor design.

In summary: there are far to many silly design problems that make this grinder a poor choice if you want to improve your coffee

’ll admit to occasionally cursing the way the ground coffee clings to the sides, nooks and crannies of the unit stubbornly, but these shortcomings were far outweighed by the convenience of pressing a button and in seconds getting a perfectly measured and ground batch of coffee to make a great brew.

I use this to grind for cold brew in the hario mizudashi and the water doesn’t trickle through the grinds as it should.

I make cold brew coffee with the coarsest setting and there’s still so much powder my coffee is grossly gritty

Got this yesterday works great looking forward to making many coffee varieties of cold brew!

So nice to have a lot of grind options for different amounts (up to 18 cups) and different grind from espresso to drip to course for a cold brew.